Comparative Study of the Functional Properties of (knitted and weaving) Jacquard Fabrics used in Mattress Fabrics

Authors

1 Textile engineering teacher Higher Institute of Engineering and Technology in Mahalla

2 Professor of Textiles, Department of Spinning, Weaving and Knitting, Faculty of Applied Arts, Helwan University

3 Assistant Professor, Department of Spinning, Weaving and Knitting, Faculty of Applied Arts, Benha University

4 Assistant Lecturer, Department of Textile Engineering Higher Institute of Engineering and Technology in Mahalla

Abstract

Recently, the computer appeared as an assistant in the design process, Computer Aided Industrial Design, through a system in which both the designer and the computer interact as a team to solve the design problem. A variety of ideas.
Nowadays bedsets are covered with up to six different fabrics: A better quality circular knit on the top panel the bed's sleeping surface; a matching or contrasting (usually woven) fabric on the border of the mattress; a matching or contrasting (usually woven) fabric on the foundation side panels; a 'non-skid' woven or non-woven fabric on the surface of the foundation and reverse side of the mattress; and a non-woven dust cover on the under side of the foundation.
Double knit fabrics have a comparative advantage due to their soft and porous feel that is characterized by knitted fabrics, which gives them a cotton appearance in many cases, although cotton threads are not used in their production. Therefore, double knit fabrics are used in high-quality, high-priced mattresses. Studying and developing this type of fabric because it takes up a large amount of the fabrics produced.
So, research is aimed to study theComparative between functional properties and functional properties for the multi-layered jacquard (weft knit fabric and woven fabric) (4) samples were produced on double jacquard weft knitting machines in different designs and (4) samples were woven in jacquardWeaving machine with different designs, the study will show the functional properties by laboratory tests, and questionnaire.
The research was based on the design of mattress fabrics with four different experiments:
First experiment (knitting):
We used polyester yarn of count (600 denier + 900 denier )for laying in yarn, polyester yarn of count 150 denier colored for face and back of Jacquard fabric design to produce mattress fabric with two different  weight 370 g/m2 and 440 g/m2 with the same width.

Main Subjects

References

1-        Honglian Cong , DESIGN METHOD OF CIRCULAR WEFT-KNITTED JACQUARD FABRIC BASED ON JACQUARD MODULE,AUTEX Research Journal, DOI 10.2478/aut-2020-0062
2-        Ehab Shirazi, Mohamed Abdel Gawad, Marwa Mostafa, Improvement of properties of multi layered fabrics used in the production of mattresses to achieve best functional performance, International Design Journal, volume7, Issue4, October 2017.
3-        Fathy Sobhy El Smadesy ,Mathematics for Jacquard Upholstery Fabrics Design Program in Textiles FEtexDM2 , Journal of Applied Arts &Sciences, Article 16, Volume 2, Number 2, 2015.
4-        Enas Hamdi Rizk , The effect of the various executive methods of a single design on some of the natural and mechanical properties of knitting fabrics jacquard , Journal of Applied Arts &Sciences ,Volume 4, Issue 1, 2017.
5-        Ray, S. C, Fundamentals and Advances in Knitting Technology. Fundamentals and Advances in Knitting Technology. Woodhead Publishing Limited. Retrieved from (2012).
6-        Banerjee, P. K. Principles of Fabric Formation. CRC Press. Retrieved from (2014). https://books.google.com/books?id=ymVYBQAAQBAJ&pgis=1
7-        STÄUBLI JACQUARD MACHINES DX 100 / DX 110 ,OptiMax EN21.05.2012, Terrot_UCC572, OMNIplus Summum ) Brochure.
8-        WAC Designer 1.1 July 2004 edition 21st Century Edition, brochure.
9-        David J. Spencer , Knitting Technology, Woodhead publishing limited and Technomic publishing company, third edition , 2001.
10-    K. F. AU. Advances in Knitting Technology, The Textile Institute, Woodhead, publishing New Delhi, 2011.
11-    Sena Terliksiz, Fatma Kalaoğlu, Selin Hanife Eryürük, "Analysis of thermal comfort properties of jacquard knitted mattress ticking fabrics", International Journal of Clothing Science and Technology, Vol. 28 Issue: 1, pp.105-114 (2016).
12-    Prof.Dr. Emel ÖNDER, Assoc.Prof.Dr. Ömer Berk BERKALP. Faculty ... E. Önder/Ö.B. Berkalp, “JACQUARD MECHANISMS ,Weaving Technology II- Course Notes”, İstanbul 2008. https://web.itu.edu.tr/~berkalpo/weaving_tech.htm
13-    Sinclair, R. - " Textiles and Fashion "1st Edition Materials, Design and Technology, Woodhead Publishing, England, (2014), P.11.
14-    ASTM D3776, Standard Test Methods for Mass per Unit Area (Weight) of Fabric, American Society for Testing and Materials, West Conshohocken, PA, USA/ (2013).
15-    15. ASTM D3786, Standard Test Method for Bursting Strength of Textile Fabrics, Diaphragm Bursting Strength Tester Method. American Society for Testing and Materials, West Conshohocken, PA, USA/ 2013.
16-    AACC Test Method 147, "Standard Test Method for Compressibility of Textile Fabrics"(2011).
17-    ASTM D 737-96, " Standard Test Method for Air Permeability of Textile Fabrics".
18-    ISO 11092,"Standard Test Method for Thermal Resistance of Textile Fabrics" (2014).
19-    Shonali Nazare, Rick D Davis and Kathryn Butler, Assessment of factors affecting fire performance of mattress, Fire Science Reviews 2012.
20-    Dominick Alevedo, Quilted Mattress Panels with Gel Fibers and Mattresses Made with Same, Patent Application Publication, United States, Oct. 31, 2013.
21-    Haex, Bart, "Back and Bed: Ergonomic Aspects of Sleeping" published in the Taylor& Francis e-library, 2005.
22-    .www.which.co.uk/reviews/mattresses/article/choosing-the-best-of-mattress,5-9-2021.
23-    www.weknowmattresses.com/mattress-types/innerspring-mattresses, 5-9-2021.
24-    Jerzy Smardzewski, New construction of mattress springs, Poznan University of Life Sciences, Faculty of Wood Technology, Department of Furniture Design, and 4 February 2013.
25-    Flexible Polyurethane Foams (FPFs) Used in Upholstered Furniture and Bedding, American Chemistry Council: Center for the Polyurethanes Industry, 2008.
26-    26.Mattress Terms, A glossary about mattresses by Dubuque Mattress, 2015.
27-    Natural Latex Mattress, Polyurethane (PU) Foam Mattress, Thursday 02 January, 2014.
28-    A.Formenti, B.Masciago, Mattress Made of Latex Foam Including a Structure of Sacked Springs and Mold for its Manufacturing, United States, Patent Application Publication, Sep. 9, 2004.
29-    Barrett, Spokane, Dolsby, Bladder Support System , United States Patent, US 7,299,513 B1, Nov. 27, 2007.
30-    Rose, Easley, Karr, Air Mattress Internal Support Structure, United States, Patent Application Publication, US 2010/0043148 A1, Feb. 25, 2010.
31-    Miles SH. Deaths between Bedrails and Air Pressure Mattresses, Journal of the American Geriatrics Society 2002; 50:1124-5.
32-    Bed Rail-Related Entrapment Deaths, Healthcare organizations, Issue 17, Sept. 6, 2
 
 

Files

Share

How to cite

Statistics