The Role of the Interior Design for Printed Buildings Using 3D Printing Technology in Protecting the Environment

Ghoneim, Prof. Dr. Omar Abdel Fattah; Fahmy, Prof. Dr. Sarah Fathi Ahmed; El Hawary, / Farida Abdel Rahim

doi:10.21608/maut.2023.307234

The Role of the Interior Design for Printed Buildings Using 3D Printing Technology in Protecting the Environment

Authors

¹ Professor of art history Dean of the College of Fine Arts Mansoura University

² Assistant Professor, Department of Interior Design and Furniture - College of Applied Arts Damietta University

³ Studying at the Department of Interior Design and Furniture - College of Applied Arts Damietta University

10.21608/maut.2023.307234

Abstract

The current construction industry faces serious problems, as huge amounts of greenhouse gases are emitted and large amounts of energy and raw materials are consumed during the construction process. Also, the current construction methods and materials are not environmentally friendly. Hence the research problem emerged, which lies in the following question: What is the impact of introducing digital control and robotics through 3D printing on making a change in building and construction processes? The research assumes that the use of additive manufacturing technology known as 3D printing in the field of building and construction will reduce the cost and construction time, which will contribute significantly to solving the housing problem in Egypt. The research aims to employ an innovative design trend in construction that will lead to a major transformation in the construction industry, and contribute to solving many environmental and societal problems in Egypt. In addition to studying the various methods of 3D printing used by construction companies around the world. The importance of the research lies in the need to change the traditional construction method and keep up with modern construction methods to stand up against the housing problems in Egypt. The most important results of the research are that the use of 3D printing in the field of building and construction will save cost and raw materials, reduce time and labor, and preserve the environment. The expansion and diffusion of the use of this modern technology in construction will help eliminate many initial obstacles such as the high price of printers, and raise awareness to the importance of using it as an alternative to traditional construction processes. The research recommends the need to work hard towards the gradual transition to the use of 3D printing, and training programs and more research are required to keep up with this major transformation in the field of construction.

Keywords

Main Subjects

Interior design and Furniture.

References

ايمان محمد أحمد هاشم، خالد فاروق السنديونى، الاتجاهات الحديثة فى التصميم ودورها فى الحد من المخلفات البيئية الصلبة الناتجة عن استخدام المنتجات، مجلة الفنون والعلوم التطبيقية، المقالة5، المجلد 2، العدد 2، يوليو 2015. 27:39. ص 29,30.

ayman m7md a7md hashm، 5ald faro8 alsndyony، alatgahat al7dytha fy altsmym w dorha fy al7d mn alm5lfat alby2ya alslba alnatga 3n ast5dam almntgat، mgla alfnon wa l3lom

alt6by8ya، alm8ala5، almgld 2، al3dd 2، yolyo 2015. 27:39. s 29,30.

. رحاب عبد الفتاح نصير، اثر الاستدامة و التقنية المتطورة فى التصميم الداخلى و الاثاث للمنشآت المؤقتة، مجلة الفنون والعلوم التطبيقي،المجلد 4، العدد 3، يوليو 2017، الصفحة 55-70. ص 57.

r7ab 3bd alfta7 nsyr، athr alastdamaw alt8nya almt6ora fy altsmym alda5lyw alathath llmnshat alm28ta، mgla alfnonwal3lom alt6by8y، almgld 4، al3dd 3، yolyo 2017، alsf7a 55-70. s 57.

المراجع الأجنبية:

Ahmed Saleh Abd Elfatah, 3D Printing in Architecture, Engineering and Construction(Concrete 3D printing), Engineering Research Journal, Vol. 162, (June 2019). P.120.
Alexander Paolini, Stefan Kollmannsberger, Ernst Rank, Additive manufacturing in construction: A review on processes, applications, and digital planning methods, Additive Manufacturing, V. 30, December (2019). P. 1,2,3,4
Ammar Alkhalidi, Dina Hatuqay, Energy efficient 3D printed buildings: Material and techniques selection worldwide study, Journal of Building Engineering, V. 30, (2020). P.2
Arnaud Perrot, State of the Art and Challenges of the Digital Construction Revolution, John Wiley & Sons, 2019. P. 3,4,5
Arnaud Perrot, Damien Rangeard, Chapter5- 3DPrinting with concrete: Impact and Design of structures, In: Arnaud Perrot, 3D Printing of Concrete: State of Art and Challenges of the Construction Revolution, ISTE Ltd and Wiley&sons Inc, 2019. P. 125
Khoshnevis, G. Bekey, Automated Construction Using Contour Crafting -- Applications on Earth and Beyond, Proceedings of the 19th ISARC, Washington, USA, 2002.
Behrokh Khoshnevis, Xiao Yuan, Behnam Zahiri, et al, Construction by Contour Crafting using sulfur
concrete with planetary applications, Rapid Prototyping Journal, Volume 22 , Number 5 ,2016 · P. 848
Behzad Nematollahi, Ming Xia, Jay Sanjayan, Current Progress of 3D Concrete Printing Technologies, 34th International Symposium on Automation and Robotics in Construction, ISARC, Taipei, Taiwan, P. 263,264.
Camille Holt, Laurie Edwards, Louise Keyte, Farzad Moghaddam, and Belinda Townsend, Chapter 17: Construction 3D Printing,In: Jay G. Sanjayan, Ali Nazari, Behzad Nematollahi, 3D Concrete Printing Technology: Construction and Building Applications, Elsevier Inc, 2019. P. 349:358
Carlos Bañón, Félix Raspall, 3D Printing Architecture Workflows, Applications, and Trends, Springer Nature Singapore Pte Ltd , Singapore,2021. P.14
Elena Provaggi, Deepak M.Kalaskar, 3D printing families: Powder, nozzle based techniques, In: Deepak M.Kalaskar, 3d printing in medicine, Elsevier, 2017. P.21&22.
Ian Gibson, David Rosen, Brent Stucker, Additive Manufacturing Technologies: 3D Printing, Rapid Prototyping, and Direct Digital Manufacturing, Springer, New York, Second Edition, 2015. P. 4&5.
Jay G.Sanjayan, Behzad Nematollahi,chapter 1: 3D Concrete Printing for Construction Applications, In: Jay G. Sanjayan, Ali Nazari, Behzad Nematollahi, 3D Concrete Printing Technology: Construction and Building Applications, Elsevier Inc, 2019. P. 1,2,3
Paulo Davim, Antonio Riveriro, Juan Pou, Additive Manufacturing: Handbooks in Advanced Manufacturing, Elsevier,2021. P.5,8,10,12
Jianzhuang Xiao, Guangchao Ji, YMEI Zhang, et.al, Large-scale 3D printing concrete technology: Current status and future opportunities, Cement and Concrete Composites, V. 122, 2021. P.2
Konrad Graser, Aniko Kahlert, Daniel M. Hall, DFAB HOUSE: implications of a building-scale demonstrator for adoption of digital fabrication in AEC, construction management and economics, vol. 39, no. 10, 2021.
Korpela M., Riikonen N., Piili H., Salminen A., Nyrhilä O. Additive Manufacturing—Past, Present, and the Future. In: Collan M., Michelsen KE. (eds) Technical, Economic and Societal Effects of Manufacturing 4.0. Palgrave Macmillan, Cham, Switzerland P. 17&18
Neil Hopkinson, Richard Hague, Philip Dickens, Rapid manufacturing, an industrial revolution for digital age, Wiley, 2006. P.68
Omar Geneidy, Walaa S.E. Ismaeel, INVESTIGATING THE APPLICATION OF THE THREE DIMENSIONAL WALL BUILDING TECHNOLOGY IN EGYPT, GREEN HERITAGE CONFERENCE, The British University in Egypt, 6-8 March 2018. P. 169, 170,171,173,174
Pessoa a, A.S. Guimaraes, S.S. Lucas, N. Simoes, 3D printing in the construction industry - A systematic review of the thermal performance in buildings, Renewable and Sustainable Energy Reviews, Volume 141, May 2021.
Tuan D. Ngo, Alireza Kashani, Gabriele Imbalzano, Kate T.Q. Nguyen, David Hui, Additive manufacturing (3D printing): A review of materials, methods, applications and challenges, Composites Part B: Engineering, Volume 143, 15 June 2018. P. 174,175
Valentin Dolhan, 3D Printing in Arcitecture: A current State of the industry with past and future Perspective, 7th Sem. Bsc of ATCoM, May 13th 2013. P.22